Wolfygryphs finished! ARROOO!

 Last night I finally managed to get my White Wolf Demigryph cavalry (converted from Thunderwolves) to the point where I'm happy to call them  finished. It feels like I've been painting these guys forever - 6 of the last 7 nights have been spent on them - but in  truth it only adds up to around 18 hours, which is 2 hours and 15 minutes per model. When I think about that, it's not too  bad. It's probably also true that the time feels greater because of all the time I spent converting them, but thankfully  that's all done now too.

There are things on these guys that I could potentially go back and change, but at this point I think I will leave them  alone. If I get inspired later I might change their claws from black to a bone colour, but I realised this would take an  eternity and decided against it. They may not even look better, against the brown on the bases. I also didn't do any skin  colour inside the ears - I feel like I've left them unpainted, but to be honest a fluffy white wolf probably has fluffy  white fur inside his ears as well, and I'm not sure the skin colour would have added anything.

I've included a couple of close-ups of the banner, to show how it came out. Being a green stuff copy of the original heavy  metal banner, the detail was never going to be perfect. The results are a little rough around the edges, but this effect is  probably accentuated by my slightly rough painting. I tried to repair a couple of ill-formed details with paint, but with  limited success. As usual, I have cheated and not put any text on the scrolls on the banner. Another thing for later, if I  get inspired. The fur could also stand to be cleaned up a bit, but it would take a disproportionate amount of time for little reward, so that may never happen. After all, I'm painting armies - I'm not some Cool Mini or Not artist lavishing attention on individual models.

Anyway, I ended up taking a lot of pictures because I know these guys are of interest to a lot of people. I'll include  further comments in the captions. Right now I'm looking forward to being able to move onto other stuff, as these guys have  absorbed my attention for over a month.

My White Wolf "Demigryph" Knights of Ulric. They don't rank up perfectly in every configuration, but given that I didn't plan it very carefully, it's quite acceptable.

Wolfygryphs almost complete

Well it feels like it's taken me a very long time to get here (no doubt not helped by losing a week to Diablo along the way), but my wolfish Demigryph cavalry are very nearly ready to paint. Since my last update I have finished assembling and converting the remaining riders, given them all shields, and started work on their cloaks. Pretty much all that remains now is to tidy up the cloaks around the shoulders of the models - I want them to have extra fluffy fur around the top of the cloak, and need to be sure I conceal a couple of shoulders where I was too lazy to add shoulder plates (figuring they'd just be covered anyway). So nearly there...

Getting all the riders into poses I was satisfied with was a slow and painful process. Some of them required stupid amounts of cutting and pinning, and a number of them ended up with sections just held together with wire, which I then filled in with green stuff. I think most of the poses are less than perfect, but they'll all come together OK.

The shields were also slightly problematic. I initially thought I would use the shields that came with the Space Wolves on the Thunderwolves - or rather, one shield in particular that included the traditional Space Wolf logo (rather than various strange bone-related symbols). I made a mould and gradually started to copy the shield I liked, but in the end I decided I was not satisfied and scrapped the plan. Instead, I copied the Space Wolf symbol and applied it to a group of the old lion head shields from the 6th edition Empire Spearmen (as per below). This ended up being a lot faster and I am happy enough with the result (which you can see on the models further down the post).

The lion shield from the 6th ed Speamen, and the pick of the shields from the Thunderwolf set

My previous efforts with the Knights Snow Leopard convinced me that creating a single cloak and then copying it and draping it onto the models before the green stuff cured was the best way to go about things, so I went with that approach again. This time I intend to go through the models and add an extra fringe around the top of the cloak once the main part is cured, so that's a bit of a deviation from my other knights, but I think it should work OK. I wanted the cloaks to be heavy and furry, and tried to focus on that when I made my master cloak. I admit that I have in my head the fluffy cloaks worn by the Night's Watch in Game of Thrones, as demonstrated by Jon Snow below. A key difference will be that my cloaks are fluffy all the way down the back and lined, whereas theirs are more interested in being fluffy on the inside and have exposed hide down the back.

Jon Snow from Game of Thrones - the Night's Watch wear only the fluffiest of cloaks

The master cloak, in all its fluffiness

The mould from which all the other cloaks were carefully peeled before they had properly hardened

Below are shots of each of the Wolfygryphs as they currently stand. Hopefully next time you see them, they will have some paint on them. Apologies for the shots. I'm still fiddling with the lightbox and my phone was wigging out over the brightness of it all. I'll get it right eventually...

The champion from the front

Breaking radio silence

OK, so it's been a couple of weeks since I last posted. This can be attributed to a number of things, but the main two have been health issues at home, and the arrival of a long-anticipated computer game, Diablo 3. I am not one of those who was avidly reading every hint of news on the internet and drooling over each sneak preview, but I'd be lying if I said I hadn't been looking forward to playing it for years. As such, it managed to absorb most of my free time for about a week after it arrived on the shelves.

Diablo will undoubtedly continue to consume some of my spare time, however I haven't touched it in a week or so now (since I finished the game on Normal difficulty and have seen the whole story). This means I've actually had some time for hobby-related activities. Part of the time has been spent on the Wolfygryphs (some progress pictures are further down in the post), but I've been doing a number of things at the same time.

First up, I have been rearranging my workspace. I wanted to buy another half a dozen shelves to completely cover the wall and give me plenty of room to stash all of my paints, but IKEA let me down by no longer stocking the cheap and cheerful spice racks I used last time. This was very disheartening and somewhat unexpected, but I guess it's what you get for putting things off for close to a year. In the end I went for a completely different solution and bought some plastic drawers from Bunnings.

My modelling workspace, halfway through its re-arrangement

Wolfygryph progress

Last weekend was not the best in terms of modelling progress - work destroyed painting night and we were busy for all of Saturday and most of Sunday - but I have moved along a little bit since the last blog update. My focus has now fairly firmly clamped onto my converted Thunderwolf/Demigryph models, so my efforts have been entirely on them. Below you can see the furthest progressed of the models at this point.

No, they're not complete. But all they need now is cloaks and shields...

I have not put as much planning into these guys as I probably should have, so my approach is a bit haphazard. I hadn't even decided which torsos to use for the riders, however when I realised the plastic Knight torsos were far larger than those of the Pistoliers, it kind of made the decision for me. The riders should be large, powerful, and hairy - like their mounts. Little round breastplates were not going to cut it. Unfortunately I've kind of had a gut-full of the plastic Knight torsos, so I decided they needed to look a little different this time. I decided this was a good time to finally make use of the wolf medallions that come on the old "hairy head" sprue, and set about carving the front off the breastplates and shaving down the medallions, before combining the two...

The Wolfygryphs are coming...

I have spent a lot of time modelling over the last few days - far more than usual. It's slightly depressing then that I have so little obvious progress to show for it. Nevertheless, I figured it was time to show what I've been working on.

On Saturday I went to the club as usual, however I brought bit and pieces rather than an army, and spent the time clipping Thunderwolves off sprues, cleaning them up and gluing them together. It's amazing how long this process seems to take, but that was why I decided to do it at the club - where I would have several hours uninterrupted in which to get it done. 

I also decided to bust out a Witch Hunter that I've had sitting in a blister for some time. I got him as part of a second-hand bundle, so I didn't really stop to think how old he really was. The model is the old Warhammer Quest Witch Hunter model, but I guess I figured they had been selling him as a regular Warhammer character for some time. It was only when I went to trim the mould lines that I realised how soft the metal was - he had lead content. Then I checked the packaging, and realised the poor guy had been stuck in there for the last 17 years...

Free at last! The Warhammer Quest Witch Hunter finally escapes the confines of his blister pack